本文介紹了Spring @Async異步線程池用法總結，分享給大家，希望對大家有幫助
1. TaskExecutor
spring異步線程池的接口類，其實質是Java.util.concurrent.Executor
Spring 已經實現的異常線程池：
1. SimpleAsyncTaskExecutor：不是真的線程池，這個類不重用線程，每次調用都會創建一個新的線程。
2. SyncTaskExecutor：這個類沒有實現異步調用，只是一個同步操作。只適用于不需要多線程的地方
3. ConcurrentTaskExecutor：Executor的適配類，不推薦使用。如果ThreadPoolTaskExecutor不滿足要求時，才用考慮使用這個類
4. SimpleThreadPoolTaskExecutor：是Quartz的SimpleThreadPool的類。線程池同時被quartz和非quartz使用，才需要使用此類
5. ThreadPoolTaskExecutor ：最常使用，推薦。 其實質是對java.util.concurrent.ThreadPoolExecutor的包裝
2. @Async
spring對過@Async定義異步任務
異步的方法有3種
1. 最簡單的異步調用，返回值為void
2. 帶參數的異步調用 異步方法可以傳入參數
3. 異常調用返回Future
詳細見代碼：
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
|
@Componentpublic class AsyncDemo { private static final Logger log = LoggerFactory.getLogger(AsyncDemo.class); /** * 最簡單的異步調用，返回值為void */ @Async public void asyncInvokeSimplest() { log.info("asyncSimplest"); } /** * 帶參數的異步調用 異步方法可以傳入參數 * * @param s */ @Async public void asyncInvokeWithParameter(String s) { log.info("asyncInvokeWithParameter, parementer={}", s); } /** * 異常調用返回Future * * @param i * @return */ @Async public Future<String> asyncInvokeReturnFuture(int i) { log.info("asyncInvokeReturnFuture, parementer={}", i); Future<String> future; try { Thread.sleep(1000 * 1); future = new AsyncResult<String>("success:" + i); } catch (InterruptedException e) { future = new AsyncResult<String>("error"); } return future; }} |
以上的異步方法和普通的方法調用相同
|
1
2
3
4
|
asyncDemo.asyncInvokeSimplest();asyncDemo.asyncInvokeWithException("test");Future<String> future = asyncDemo.asyncInvokeReturnFuture(100);System.out.println(future.get()); |
3. Spring 開啟異步配置
Spring有兩種方法啟動配置
1. 注解
2. XML
3.1 通過注解實現
要啟動異常方法還需要以下配置
1. @EnableAsync 此注解開戶異步調用功能
2. public AsyncTaskExecutor taskExecutor() 方法自定義自己的線程池，線程池前綴”Anno-Executor”。如果不定義，則使用系統默認的線程池。
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
|
@SpringBootApplication@EnableAsync // 啟動異步調用public class AsyncApplicationWithAnnotation { private static final Logger log = LoggerFactory.getLogger(AsyncApplicationWithAnnotation.class); /** * 自定義異步線程池 * @return */ @Bean public AsyncTaskExecutor taskExecutor() { ThreadPoolTaskExecutor executor = new ThreadPoolTaskExecutor(); executor.setThreadNamePrefix("Anno-Executor"); executor.setMaxPoolSize(10); // 設置拒絕策略 executor.setRejectedExecutionHandler(new RejectedExecutionHandler() { @Override public void rejectedExecution(Runnable r, ThreadPoolExecutor executor) { // ..... } }); // 使用預定義的異常處理類 // executor.setRejectedExecutionHandler(new ThreadPoolExecutor.CallerRunsPolicy()); return executor; } public static void main(String[] args) { log.info("Start AsyncApplication.. "); SpringApplication.run(AsyncApplicationWithAnnotation.class, args); }} |
以上的異常方法和普通的方法調用相同
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
|
@RunWith(SpringRunner.class)@SpringBootTest(classes=AsyncApplicationWithAnnotation.class)public class AsyncApplicationWithAnnotationTests { @Autowired private AsyncDemo asyncDemo; @Test public void contextLoads() throws InterruptedException, ExecutionException { asyncDemo.asyncInvokeSimplest(); asyncDemo.asyncInvokeWithParameter("test"); Future<String> future = asyncDemo.asyncInvokeReturnFuture(100); System.out.println(future.get()); }} |
執行測試用例，輸出內容如下：
可以看出主線程的名稱為main; 異步方法則使用 Anno-Executor1，可見異常線程池起作用了
|
1
2
3
4
5
|
2017-03-28 20:00:07.731 INFO 5144 --- [ Anno-Executor1] c.hry.spring.async.annotation.AsyncDemo : asyncSimplest2017-03-28 20:00:07.732 INFO 5144 --- [ Anno-Executor1] c.hry.spring.async.annotation.AsyncDemo : asyncInvokeWithParameter, parementer=test2017-03-28 20:00:07.751 INFO 5144 --- [ Anno-Executor1] c.hry.spring.async.annotation.AsyncDemo : asyncInvokeReturnFuture, parementer=100success:1002017-03-28 20:00:08.757 INFO 5144 --- [ Thread-2] s.c.a.AnnotationConfigApplicationContext : Closing org.springframework.context.annotation.AnnotationConfigApplicationContext@47af7f3d: startup date [Tue Mar 28 20:00:06 CST 2017]; root of context hierarchy |
3.2 通過XML實現
Bean文件配置: spring_async.xml
1. 線程的前綴為xmlExecutor
2. 啟動異步線程池配置
|
1
2
3
4
5
6
7
8
9
|
<!-- 等價于 @EnableAsync， executor指定線程池 --><task:annotation-driven executor="xmlExecutor"/><!-- id指定線程池產生線程名稱的前綴 --><task:executor id="xmlExecutor" pool-size="5-25" queue-capacity="100" keep-alive="120" rejection-policy="CALLER_RUNS"/> |
線程池參數說明
1. ‘id' ： 線程的名稱的前綴
2. ‘pool-size'：線程池的大小。支持范圍”min-max”和固定值（此時線程池core和max sizes相同）
3. ‘queue-capacity' ：排隊隊列長度
○ The main idea is that when a task is submitted, the executor will first try to use a free thread if the number of active threads is currently less than the core size.
○ If the core size has been reached, then the task will be added to the queue as long as its capacity has not yet been reached.
○ Only then, if the queue's capacity has been reached, will the executor create a new thread beyond the core size.
○ If the max size has also been reached, then the executor will reject the task.
○ By default, the queue is unbounded, but this is rarely the desired configuration because it can lead to OutOfMemoryErrors if enough tasks are added to that queue while all pool threads are busy.
4. ‘rejection-policy': 對拒絕的任務處理策略
○ In the default ThreadPoolExecutor.AbortPolicy, the handler throws a runtime RejectedExecutionException upon rejection.
○ In ThreadPoolExecutor.CallerRunsPolicy, the thread that invokes execute itself runs the task. This provides a simple feedback control mechanism that will slow down the rate that new tasks are submitted.
○ In ThreadPoolExecutor.DiscardPolicy, a task that cannot be executed is simply dropped.
○ In ThreadPoolExecutor.DiscardOldestPolicy, if the executor is not shut down, the task at the head of the work queue is dropped, and then execution is retried (which can fail again, causing this to be repeated.)
5. ‘keep-alive' ： 線程保活時間（單位秒）
setting determines the time limit (in seconds) for which threads may remain idle before being terminated. If there are more than the core number of threads currently in the pool, after waiting this amount of time without processing a task, excess threads will get terminated. A time value of zero will cause excess threads to terminate immediately after executing a task without remaining follow-up work in the task queue()
異步線程池
|
1
2
3
4
5
6
7
8
9
10
|
@SpringBootApplication@ImportResource("classpath:/async/spring_async.xml")public class AsyncApplicationWithXML { private static final Logger log = LoggerFactory.getLogger(AsyncApplicationWithXML.class); public static void main(String[] args) { log.info("Start AsyncApplication.. "); SpringApplication.run(AsyncApplicationWithXML.class, args); }} |
測試用例
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
|
@RunWith(SpringRunner.class)@SpringBootTest(classes=AsyncApplicationWithXML.class)public class AsyncApplicationWithXMLTest { @Autowired private AsyncDemo asyncDemo; @Test public void contextLoads() throws InterruptedException, ExecutionException { asyncDemo.asyncInvokeSimplest(); asyncDemo.asyncInvokeWithParameter("test"); Future<String> future = asyncDemo.asyncInvokeReturnFuture(100); System.out.println(future.get()); }} |
運行測試用例，輸出內容如下：
可以看出主線程的名稱為main; 異步方法則使用 xmlExecutor-x，可見異常線程池起作用了
|
1
2
3
4
5
6
|
2017-03-28 20:12:10.540 INFO 12948 --- [ main] c.h.s.a.xml.AsyncApplicationWithXMLTest : Started AsyncApplicationWithXMLTest in 1.441 seconds (JVM running for 2.201)2017-03-28 20:12:10.718 INFO 12948 --- [ xmlExecutor-2] com.hry.spring.async.xml.AsyncDemo : asyncInvokeWithParameter, parementer=test2017-03-28 20:12:10.721 INFO 12948 --- [ xmlExecutor-1] com.hry.spring.async.xml.AsyncDemo : asyncSimplest2017-03-28 20:12:10.722 INFO 12948 --- [ xmlExecutor-3] com.hry.spring.async.xml.AsyncDemo : asyncInvokeReturnFuture, parementer=100success:1002017-03-28 20:12:11.729 INFO 12948 --- [ Thread-2] s.c.a.AnnotationConfigApplicationContext : Closing org.springframework.context.annotation.AnnotationConfigApplicationContext@71809907: startup date [Tue Mar 28 20:12:09 CST 2017]; root of context hierarchy |
4. 對異步方法的異常處理
在調用方法時，可能出現方法中拋出異常的情況。在異步中主要有有兩種異常處理方法：
1. 對于方法返回值是Futrue的異步方法: a) 一種是在調用future的get時捕獲異常; b) 在異常方法中直接捕獲異常
2. 對于返回值是void的異步方法：通過AsyncUncaughtExceptionHandler處理異常
AsyncExceptionDemo：
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
|
@Componentpublic class AsyncExceptionDemo { private static final Logger log = LoggerFactory.getLogger(AsyncExceptionDemo.class); /** * 最簡單的異步調用，返回值為void */ @Async public void asyncInvokeSimplest() { log.info("asyncSimplest"); } /** * 帶參數的異步調用 異步方法可以傳入參數 * 對于返回值是void，異常會被AsyncUncaughtExceptionHandler處理掉 * @param s */ @Async public void asyncInvokeWithException(String s) { log.info("asyncInvokeWithParameter, parementer={}", s); throw new IllegalArgumentException(s); } /** * 異常調用返回Future * 對于返回值是Future，不會被AsyncUncaughtExceptionHandler處理，需要我們在方法中捕獲異常并處理 * 或者在調用方在調用Futrue.get時捕獲異常進行處理 * * @param i * @return */ @Async public Future<String> asyncInvokeReturnFuture(int i) { log.info("asyncInvokeReturnFuture, parementer={}", i); Future<String> future; try { Thread.sleep(1000 * 1); future = new AsyncResult<String>("success:" + i); throw new IllegalArgumentException("a"); } catch (InterruptedException e) { future = new AsyncResult<String>("error"); } catch(IllegalArgumentException e){ future = new AsyncResult<String>("error-IllegalArgumentException"); } return future; }} |
實現AsyncConfigurer接口對異常線程池更加細粒度的控制
a) 創建線程自己的線程池
b) 對void方法拋出的異常處理的類AsyncUncaughtExceptionHandler
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
|
/** * 通過實現AsyncConfigurer自定義異常線程池，包含異常處理 * * @author hry * */@Servicepublic class MyAsyncConfigurer implements AsyncConfigurer{ private static final Logger log = LoggerFactory.getLogger(MyAsyncConfigurer.class); @Override public Executor getAsyncExecutor() { ThreadPoolTaskExecutor threadPool = new ThreadPoolTaskExecutor(); threadPool.setCorePoolSize(1); threadPool.setMaxPoolSize(1); threadPool.setWaitForTasksToCompleteOnShutdown(true); threadPool.setAwaitTerminationSeconds(60 * 15); threadPool.setThreadNamePrefix("MyAsync-"); threadPool.initialize(); return threadPool; } @Override public AsyncUncaughtExceptionHandler getAsyncUncaughtExceptionHandler() { return new MyAsyncExceptionHandler(); } /** * 自定義異常處理類 * @author hry * */ class MyAsyncExceptionHandler implements AsyncUncaughtExceptionHandler { @Override public void handleUncaughtException(Throwable throwable, Method method, Object... obj) { log.info("Exception message - " + throwable.getMessage()); log.info("Method name - " + method.getName()); for (Object param : obj) { log.info("Parameter value - " + param); } } } } |
|
1
2
3
4
5
6
7
8
9
10
11
12
|
@SpringBootApplication@EnableAsync // 啟動異步調用public class AsyncApplicationWithAsyncConfigurer { private static final Logger log = LoggerFactory.getLogger(AsyncApplicationWithAsyncConfigurer.class); public static void main(String[] args) { log.info("Start AsyncApplication.. "); SpringApplication.run(AsyncApplicationWithAsyncConfigurer.class, args); }} |
測試代碼
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
|
@RunWith(SpringRunner.class)@SpringBootTest(classes=AsyncApplicationWithAsyncConfigurer.class)public class AsyncApplicationWithAsyncConfigurerTests { @Autowired private AsyncExceptionDemo asyncDemo; @Test public void contextLoads() throws InterruptedException, ExecutionException { asyncDemo.asyncInvokeSimplest(); asyncDemo.asyncInvokeWithException("test"); Future<String> future = asyncDemo.asyncInvokeReturnFuture(100); System.out.println(future.get()); }} |
運行測試用例
|
1
2
3
4
5
6
7
8
9
10
|
MyAsyncConfigurer 捕獲AsyncExceptionDemo 對象在調用asyncInvokeWithException的異常2017-04-02 16:01:45.591 INFO 11152 --- [ MyAsync-1] c.h.s.a.exception.AsyncExceptionDemo : asyncSimplest2017-04-02 16:01:45.605 INFO 11152 --- [ MyAsync-1] c.h.s.a.exception.AsyncExceptionDemo : asyncInvokeWithParameter, parementer=test2017-04-02 16:01:45.608 INFO 11152 --- [ MyAsync-1] c.h.s.async.exception.MyAsyncConfigurer : Exception message - test2017-04-02 16:01:45.608 INFO 11152 --- [ MyAsync-1] c.h.s.async.exception.MyAsyncConfigurer : Method name - asyncInvokeWithException2017-04-02 16:01:45.608 INFO 11152 --- [ MyAsync-1] c.h.s.async.exception.MyAsyncConfigurer : Parameter value - test2017-04-02 16:01:45.608 INFO 11152 --- [ MyAsync-1] c.h.s.a.exception.AsyncExceptionDemo : asyncInvokeReturnFuture, parementer=100error-IllegalArgumentException2017-04-02 16:01:46.656 INFO 11152 --- [ Thread-2] s.c.a.AnnotationConfigApplicationContext : Closing org.springframework.context.annotation.AnnotationConfigApplicationContext@47af7f3d: startup date [Sun Apr 02 16:01:44 CST 2017]; root of context hierarchy |
5. 源碼地址
以上就是本文的全部內容，希望對大家的學習有所幫助，也希望大家多多支持服務器之家。
原文鏈接：http://blog.csdn.net/hry2015/article/details/67640534?utm_source=tuicool&utm_medium=referral
